What does it cost?
These are indicative ranges from published Canadian price guides (HomeStars), in CAD before GST/HST or QST. Some figures are for the guard material only and some include installation, so ask for an installed total for your house.
| Situation | Typical price |
|---|---|
| Mesh screensMaterial | $1.25–$5 per linear foot |
| Brush guardsMaterial | $2–$5 per linear foot |
| Steel screen guardsMaterial | $3–$7 per linear foot |
| Surface tension (helmet) guards | $4–$18 per linear foot |
| Gutter guard installation, published local rangeHomeStars Gatineau page | $7–$20 per linear foot |
| Branded micro-mesh system (LeafFilter)Including professional installation | $15–$30 per linear foot |
| Cleaning or maintaining existing guards | $50–$150+ per visit |
What the price depends on
- Guard type: snap-in screens and brushes cost least; micro-mesh and helmets most.
- Total length of eavestrough and number of corners and downspouts.
- Whether the troughs need cleaning or repair first; guards go on clean, sound eavestroughs.
- Height and roof pitch.
- Whether a warranty and future maintenance are included.
Indication based on public prices, in Canadian dollars before sales tax unless stated, updated October 2026. 123
Estimate your price
Worked example based on the prices above. Nothing is stored. The real price depends on the job on site. 2
How much do gutter guards cost?
It depends mostly on the type. HomeStars lists mesh screens at $1.25–$5 per linear foot, brush guards at $2–$5, steel screens at $3–$7 and surface-tension helmets at $4–$18. A branded micro-mesh system such as LeafFilter runs $15–$30 per foot including installation.
For professional installation of standard guards, one published HomeStars city range is $7–$20 per linear foot. On a house with 150 feet of eavestrough, that's roughly $1,050–$3,000 before GST/HST or QST. Get the installed total in writing.
Types of gutter guards compared
Each type blocks leaves in a different way. Match it to what falls on your roof.
- Mesh screens: a grid over the trough. Cheap and easy, but small seeds and needles can lodge in the holes.
- Micro-mesh: very fine stainless mesh that keeps out pine needles and roof grit. Costs more and needs an occasional brush-off.
- Brush guards: bristles sit inside the trough. Simple to fit yourself, but debris can tangle in them.
- Surface-tension (helmet) guards: a curved cover sends water around the edge into the trough while leaves slide off. Higher price, and they change how the roof edge looks.
- Steel screens: a sturdier metal version of the basic screen, priced in between.
Sources: 1
Are gutter guards worth it?
If big trees hang over your roof, usually yes. Without guards, HomeStars advises cleaning every three to four months in that situation; guards help prevent clogs and reduce how often you need cleaning.
If there are no trees nearby, two cleanings a year at about $100–$250 each may cost less over ten years than a premium guard system. Do the simple math for your house before signing.
Gutter guards, ice dams and Canadian winters
Guards don't stop ice dams. CAA-Québec explains that ice dams are almost always caused by poor attic and soffit ventilation: heat from the house melts snow on the roof and it refreezes at the cold edge. The real fixes are more attic insulation, air sealing and clear soffit vents.
Before the first hard frost, check that the guards are clear on top, since a layer of wet leaves can still send water over the edge. Never chip ice off guards or troughs with a hammer or axe; it damages the roofing and the guard.
Sources: 5
Metal roofs, holiday lights and other practical points
On a metal roof, snow and large sheets of ice can slide off suddenly, so ask the installer about sturdier guards and hangers on the eaves facing walkways. If you hang holiday lights, choose clips made for gutter guards and ask the installer where they can go without voiding the warranty.
Guards go on clean, sound eavestroughs. If yours sag, leak or are near 20–30 years old, replace them first and add guards in the same visit.
How it works
- Check the troughsThe installer checks slope, hangers and leaks. Damaged sections are repaired or replaced first.
- Clean and flushTroughs and downspouts are cleaned and flushed so the guards start on a clear system.
- Fit the guardsGuards are cut to length and fixed under the shingle edge or onto the trough lip, depending on type.
- Corners and downspoutsCorners and downspout openings get extra attention, since that's where debris builds up.
- Water testWater is run over the roof edge to check that it flows into the trough, not over the guard.
How to choose a good pro
- Ask which type they recommend for your trees: leaves, needles or seeds.
- Get an installed total including cleaning the troughs first.
- Ask whether fitting the guard under the shingles affects your roof warranty.
- Get the guard warranty in writing and what it requires from you.
- Ask what maintenance the guards will still need and what it costs.
- Check workers' compensation status and liability insurance.
- Compare at least two quotes, including one for a simpler guard type.
Frequently asked questions
What is the average cost of gutter guards installed?
Published Canadian figures run about $7–$20 per linear foot for professional installation, and $15–$30 per foot for branded micro-mesh systems. For 150 feet of eavestrough, that's roughly $1,050–$4,500 before tax.
Do gutter guards really work?
They help prevent clogs and reduce how often you need cleaning. They don't eliminate maintenance: fine debris still collects and the guards need checking. Maintaining existing guards costs about $50–$150+ per visit.
Do gutter guards cause ice dams?
Ice dams come from heat escaping into the attic, not from the guards. Insulation, air sealing and soffit ventilation are the fix. Keep the top of the guards clear of leaves before freeze-up.
What's the best gutter guard for pine needles?
Fine micro-mesh is usually the choice for needles, because coarse screens let them through or trap them in the holes. It costs more, so compare it against more frequent cleaning.
Can I install gutter guards myself?
Snap-in screens and brush guards on a bungalow are a manageable DIY job. On a two-storey house, use a pro: working at 3 m or more needs fall protection.
Can you hang Christmas lights with gutter guards?
Yes, with clips made for guard edges or shingles. Ask your installer which clips are safe so you don't bend the guard or void the warranty.
Want to know what your job will cost?
Ask for a free, no-obligation quote from a vetted pro. It takes two minutes.
Related guides
Sources
- Gutter costs, HomeStars (checked 2026-10-30)
- Gutters and eavestroughs specialists in Gatineau: prices, HomeStars (checked 2026-10-30)
- Gutter cleaning cost, HomeStars (checked 2026-10-30)
- Gutter replacement cost, HomeStars (checked 2026-10-30)
- Ice damming on roofs: zero tolerance, CAA-Québec (checked 2026-10-29)
- Ladders: portable, Canadian Centre for Occupational Health and Safety (checked 2026-10-29)
- GST/HST calculator and rates, Canada Revenue Agency (checked 2026-10-29)
Written by the BrightKept editors from the sources above. How we write our guides.