BrightKeptGet a free quote
Menu

Deck and fence staining in Canada: cost, timing and the right finish

Having a deck stained or sealed in Canada typically costs $150–$1,200 before tax, according to HomeStars, depending on size, railings and how much stripping is needed. Stain dry wood on a mild day with a dry forecast, usually late spring to early fall. Stain makers recommend stain rather than paint on a deck, and Cabot suggests inspecting the finish every 2–3 years.

Free and no obligation. Your request goes to one vetted pro in your area at most. If there isn't one yet, we'll tell you.

Stain or seal a deck

$150–$1,200 (HomeStars)

  • Painter's labour$40–$80 per hour
  • WeatherAbout 10–27°C, dry for 24–36 hours
  • Inspect the finishEvery 2–3 years on a deck (Cabot)
  • Ready for stain?Water soaks in instead of beading

What does it cost?

Canadian price data for deck staining is thin. These are indicative published figures from HomeStars, in CAD before GST/HST or PST. Stripping an old, peeling finish is what pushes a job to the top of the range, so ask for prep and staining as separate lines.

Price guide: Deck and fence staining
SituationTypical price
Staining or sealing a deck (whole job)HomeStars deck contractor guide$150–$1,200
Painter's labour, if a painting company does itHomeStars painting guide$40–$80 per hour
Painting company minimum project feeAt many painting firms$1,000–$2,000

What the price depends on

  • Deck size, number of stairs and length of railings.
  • Condition: a weathered or peeling deck needs cleaning, stripping or sanding first.
  • The finish: water repellent, semi-transparent or solid stain.
  • Fences: both sides, height, and how much plant growth has to be cleared.
  • Repairs to loose boards, nails or rot before staining.
  • GST/HST of 5% to 15% depending on your province, plus PST where it applies.

Indication based on public prices, in Canadian dollars before sales tax unless stated, updated October 2026. 1214

How much does it cost to stain a deck?

HomeStars lists $150–$1,200 to stain or seal a deck. A small, well-kept deck that only needs a wash and a fresh coat sits at the low end. A large deck with stairs, railings and an old finish that has to be stripped sits at the top, or above it.

If a painting company does the job, HomeStars puts painters' labour at $40–$80 an hour and notes that many firms have a minimum project fee of $1,000–$2,000. For a small deck, a company that specialises in deck and fence care may be a better fit than a full-service painter. Ask each quote to separate cleaning, stripping, repairs and staining.

Sources: 12

Stain, sealer or paint: which finish for a deck?

Stain makers steer you toward stain on a deck. Cabot puts the difference simply: paint coats the top of the wood, while stain penetrates it. When paint on a deck starts to peel, Cabot notes, it needs extensive scraping before you can refinish.

Within stains, the choice is how much colour you want and how often you'll recoat. Cabot says clear, colourless water sealers usually last about one season. Semi-transparent stains show the grain with more colour and need reapplying every 1–2 years. Solid stains hide the grain but, on a sound surface without heavy wear, can last 5 years or more.

If you're unsure about a colour, Benjamin Moore suggests testing samples on a hidden spot or a spare board of the same wood, because the result changes with the opacity and the type of wood.

Sources: 49

When to stain: timing by weather and season

Stain needs dry wood and mild weather. Cabot gives an ideal application range of 50–80°F (about 10–27°C) and recommends a day with no rain expected for 24 hours; Benjamin Moore asks for a dry forecast of at least 36 hours. Cold or humid conditions can double drying time. Follow the shade around the deck through the day rather than staining boards in hot direct sun, which can leave lap marks.

In most of Canada that means late spring to early fall. The wood itself has to be dry too: Cabot warns that stain applied to a damp surface won't adhere well and will crack or peel. On the West Coast, wait for a dry stretch after the rain rather than the first warm afternoon. The label on your product has the final word on temperature and recoat times.

Sources: 359

New deck or pressure-treated wood: how long to wait?

Longer than the day the last board goes down. Benjamin Moore says new wood is generally too wet to stain right away, and that treated lumber needs time to dry first. Cabot adds that freshly treated lumber won't let a stain adhere until the treatment has worn down, and suggests waiting a few months.

The way to know is a water test. Sprinkle water on the boards: if it beads on the surface, Benjamin Moore says the wood isn't ready to accept stain; if it soaks in quickly, it can be stained after a light cleaning. Some new boards also carry a glossy mill glaze that must be broken with a wood brightener and a good scrub, then left to dry for at least 48 hours before staining.

Sources: 96

Clean, strip, stain, seal: how the job is done

Prep decides how long the stain lasts. For routine upkeep, Cabot suggests hosing the deck once or twice a year with a brush where needed, and says you don't need to pressure clean it. The Real Cedar decking guide goes further for cedar: never power-wash, because it damages the wood fibres.

A deck with a failing finish needs more. Benjamin Moore suggests removing loose, peeling stain by power washing, wire brushing or sanding, then using a stain remover to uncover bare wood, followed by rinsing, a brightener and sanding. On weathered boards, a wood restorer and a stiff brush lift loose, dead fibres. Cabot's stripper stands for 15 minutes and may need more than one application on thick old coats. Then the wood must dry fully before stain goes on.

  • Repair loose boards and set raised nails or screws.
  • Clean, and strip or sand if the old finish is peeling.
  • Let the wood dry fully.
  • Apply stain in thin coats, board by board, following the label.
  • Keep foot traffic off for at least two days, or as long as the label says.

Sources: 71098

Old paint, strata fences and other things to check

If an old deck or fence was painted rather than stained, test before you strip. Health Canada says exterior paint on homes built between 1960 and 1990 may contain lead, and homes before 1960 likely do. It advises against sanders, heat guns and open flames on lead paint.

In a BC strata, fences, railings and balconies are on the list of things that need the strata's written approval before you change them under the Standard Bylaws. A new stain colour on a shared fence is worth asking about first.

In BC, ask the contractor for a WorkSafeBC clearance letter. If a business isn't registered or paying as required, WorkSafeBC says the customer could be held responsible for its premiums.

Sources: 111213

Deck and fence staining in your city

For each city we looked up the local bylaws, permits and practical details.

How it works

  1. Check the boardsSprinkle water on the deck. If it soaks in quickly, the wood will take stain; if it beads, wait or prep further. Note any loose or soft boards.
  2. Choose the finishPick a stain opacity for the deck surface: clear, semi-transparent or solid, knowing how often each needs recoating.
  3. Get written quotesAsk for cleaning, stripping, repairs and staining as separate lines, and the product name.
  4. Clean and stripHose and brush, remove peeling finish by brushing, sanding or a stain remover, and go easy on cedar.
  5. Stain in good weatherAbout 10–27°C, out of hot sun, with a dry forecast for 24–36 hours.
  6. Let it cureKeep traffic and furniture off for about two days, then inspect the finish every 2–3 years.

How to choose a good pro

  • Ask which product they'll use and whether it suits your wood (cedar, pressure-treated).
  • Ask how they clean: hose and brush, and no power washing on cedar.
  • Get prep, repairs and staining priced separately in writing.
  • Ask what they do if rain is forecast after the stain goes on.
  • Confirm liability insurance and, in BC, a WorkSafeBC clearance letter.
  • Test old painted surfaces for lead before any stripping or sanding.
  • For strata fences or railings, get written approval before work starts.

Frequently asked questions

How much does it cost to stain a deck in Canada?

HomeStars lists $150–$1,200 to stain or seal a deck, before tax. Stripping an old finish, stairs and long railings push the price up.

What is the best time to stain a deck?

A dry, mild day with no rain expected for 24 hours. Cabot gives about 10–27°C as the ideal range. In most of Canada that's late spring to early fall.

How long should I wait to stain a new pressure-treated deck?

Treated lumber is usually too wet to stain right away. Cabot suggests waiting a few months for the treatment to wear down. Sprinkle water on it: when it soaks in instead of beading, the wood is ready.

How often should a deck be restained?

It depends on the finish. Cabot says clear water sealers last about one season, semi-transparent stains need reapplying every 1–2 years, and solid stains can last 5 years or more. Inspect a deck every 2–3 years.

Can I paint my deck instead of staining it?

You can, but stain makers recommend stain. Cabot notes that paint coats the top of the wood while stain penetrates it, and that peeling paint needs extensive scraping before you can refinish.

Should I pressure wash my deck before staining?

Not as routine. Cabot says a hose and brush are enough for regular cleaning, and the Real Cedar guide says never to power-wash a cedar deck because it damages the wood fibres. For a peeling finish, use brushing, sanding or a stain remover.

What is the best deck stain in Canada?

There's no single answer. Solid stains hide the grain but last longest, semi-transparent stains show the grain and need recoating every 1–2 years, and clear sealers last about a season, according to Cabot. Test a sample on a spare board first.

Want to know what your job will cost?

Ask for a free, no-obligation quote from a vetted pro. It takes two minutes.

Get a free quote

Related guides

Sources

  1. Deck contractor pros (price ranges), HomeStars (checked 2026-10-30)
  2. Cost to paint a house, HomeStars (checked 2026-10-30)
  3. When to stain, Cabot (checked 2026-10-30)
  4. Why stain, Cabot (checked 2026-10-30)
  5. Exterior stain prep, Cabot (checked 2026-10-30)
  6. New construction, Cabot (checked 2026-10-30)
  7. Maintain your stain, Cabot (checked 2026-10-30)
  8. How to strip a deck, Cabot (checked 2026-10-30)
  9. How to stain a deck, Benjamin Moore Canada (checked 2026-10-30)
  10. Finishing cedar decking, Real Cedar (checked 2026-10-30)
  11. Lead-based paint, Health Canada (checked 2026-10-29)
  12. Strata Property Act, Schedule of Standard Bylaws, BC Laws, Province of British Columbia (checked 2026-10-29)
  13. Homeowners: who needs coverage, WorkSafeBC (checked 2026-10-29)
  14. GST/HST calculator (and rates), Canada Revenue Agency (checked 2026-10-29)

Written by the BrightKept editors from the sources above. How we write our guides.

Get a free quotePrices