BrightKeptGet a free quote
Menu

Chimney repair: caps, crowns, liners and rebuilds, with real prices

Most chimney repairs in Canada fall between $150 and $3,000 before tax, according to published HomeStars prices: about $150–$500 for a new cap, $300–$2,000+ for a crown, $200–$700 for flashing and $900–$3,800+ for a stainless-steel liner. A full rebuild starts around $4,000. Fix small cracks before winter: freeze–thaw turns them into loose bricks.

Free and no obligation. Your request goes to one vetted pro in your area at most. If there isn't one yet, we'll tell you.

Cap replacement

$150–$500 before tax

  • Crown repair$300–$2,000+
  • Stainless linerAbout $900–$3,800+ installed
  • Full rebuild$4,000–$20,000+
  • Best timeLate spring to early fall, before frost

Good to know. This is skilled work on your home. BrightKept only arranges it through a licensed, insured specialist in your area. If there isn't one in your area yet, we'll tell you honestly.

What does it cost?

These are indicative published prices from the HomeStars Toronto chimney guide (updated August 2026), before GST/HST. Other cities can be lower or higher. Ontario adds 13% HST; elsewhere expect 5% GST plus PST or QST where it applies, or 14–15% HST in Atlantic Canada.

Price guide: Chimney repair
SituationTypical price
Cap replacement$150–$500
Brickwork and tuck-pointingSmall areas$150–$500
Flashing repair$200–$700
Crown repair or replacement$300–$2,000+
Stainless-steel liner, installed$900–$3,800+
Cast-in-place liner$2,000–$7,000+
Partial rebuild$600–$3,000+
Complete rebuild$4,000–$20,000+
Chimney removalAverage about $4,500$2,000–$15,000

What the price depends on

  • Height of the chimney and the roof pitch, which decide whether scaffolding is needed.
  • How much brick has to come down before sound masonry is reached.
  • Liner material and flue size: stainless, aluminium, clay tile or cast-in-place.
  • Whether the flashing and roofing around the chimney also need work.
  • Access, season and whether the work needs a permit in your city.

Indication based on public prices, in Canadian dollars before sales tax unless stated, updated October 2026. 17

Signs your chimney needs repair

Many problems start at the top, where you can't see them from the driveway. A yearly sweep is often the first time anyone looks. Promutuel lists the warning signs worth acting on:

  • Cracking, warping or corrosion in the liner, connector or outside of the chimney.
  • Rust spots on the exterior or on a metal chimney.
  • Swelling in the liner, or cracked and missing pieces of flue tile.
  • Black or white stains on the outside bricks (white is often salts carried by water).

Sources: 3

Chimney cap and crown: the cheapest fix that saves the most

The cap is the metal cover over the flue. It keeps out rain, snow, birds and raccoons. The crown is the concrete or mortar slab on top of the brick that sheds water away from the flue. CAA-Québec lists both among the first things a technician should check.

If the crown cracks, water gets into the brick. In a Canadian winter that water freezes, expands and pushes the masonry apart, then thaws and soaks in deeper. That's why a $150–$500 cap or a crown repair in the fall can prevent a partial rebuild a few years later. Stainless-steel caps cost more than galvanized ones but don't rust.

Sources: 21

Flashing and leaks around the chimney

Flashing is the metal that seals the joint between the chimney and the roof. When it lifts or the caulking dries out, water runs down inside the attic or the ceiling next to the fireplace. CAA-Québec includes the caulking around the flashing in a proper inspection.

HomeStars lists flashing repair at $200–$700 in Toronto. If your roof is near the end of its life, it often makes sense to redo the flashing when the roof is replaced, so you pay for one setup instead of two.

Sources: 21

Chimney liners: when you need one and what they cost

The liner is the inside of the flue. It keeps heat and combustion gases away from the brick and the house framing. Square One notes that masonry and flue linings aren't built to withstand the intense heat of a chimney fire, so a liner is often damaged after one.

You'll also hear about liners when you switch appliances, for example adding a wood insert to an old fireplace, or when an inspection finds cracked clay tiles. HomeStars gives these installed price ranges in Toronto:

  • Aluminium: about $625–$2,250 (used for some gas appliances, not for wood).
  • Stainless steel: about $900–$3,800 or more.
  • Clay or terracotta tile: about $2,000–$3,500.
  • Thermocrete or ceramic: about $1,000–$5,000.
  • Cast-in-place: about $2,000–$7,000 or more.

Sources: 41

Tuck-pointing, partial rebuild or removal?

Tuck-pointing replaces worn mortar joints and is the right call when the bricks themselves are sound. Once bricks are loose, spalled or the chimney leans, a mason takes it down to solid masonry and rebuilds from there. HomeStars lists partial rebuilds at $600–$3,000+ and complete rebuilds at $4,000–$20,000+.

If you no longer use the fireplace, removal is an option, at about $2,000–$15,000 with an average near $4,500. Taking a chimney down below the roofline also means patching the roof, so ask for that in the same quote.

Sources: 1

Insurance, licences and who does the work

Square One says home insurance generally covers chimney repairs caused by an insured peril, not damage from wear or neglect. Photos from past sweeps and inspection reports help show the chimney was maintained. After any chimney fire, CAA-Québec advises an inspection before the fireplace is used again.

In Québec, CAA-Québec recommends a contractor with an RBQ licence for solid-fuel heating systems. Elsewhere, ask for proof of liability insurance and workers' compensation coverage. In BC, a WorkSafeBC clearance letter confirms a business is registered and paying premiums. In Ontario, WSIB says a clearance certificate isn't required when a homeowner hires a contractor for their own home, so ask for proof of coverage directly. BrightKept only arranges chimney repair through a licensed, insured specialist.

Sources: 4256

Chimney repair in your city

For each city we looked up the local bylaws, permits and practical details.

How it works

  1. Inspection firstA sweep or mason inspects the cap, crown, flashing, brick and liner, ideally with photos or a camera in the flue.
  2. Written scope and quoteYou get a written quote listing each item, materials (for example stainless cap, liner type) and whether scaffolding is included.
  3. Permit checkAsk whether your city needs a building permit for a rebuild, removal or new liner, and who applies for it.
  4. Work on the roofThe crew sets up ladders or scaffolding, protects the roof and does the masonry, flashing or liner work.
  5. Cure and sealNew mortar and crowns need dry days above freezing to cure. A breathable water repellent may be applied afterwards.
  6. Final check and paperworkThe liner and connections are checked before the first fire. Keep the invoice and photos with your insurance papers.

How to choose a good pro

  • Get two written quotes that list the same scope, so you compare like with like.
  • Ask for photos of the damage from the top of the chimney.
  • Ask which liner material they propose and why it suits your appliance.
  • Ask for proof of liability insurance and workers' compensation coverage.
  • In Québec, check the RBQ licence. In BC, look up a WorkSafeBC clearance letter.
  • Ask whether a permit is needed and who arranges it.
  • Ask how long the work is warrantied and get it in writing.
  • Avoid booking masonry work in freezing weather unless the contractor explains how mortar will cure.

Frequently asked questions

How much does chimney repair cost?

Published HomeStars prices for Toronto run from $150–$500 for a new cap to $300–$2,000+ for a crown and $600–$3,000+ for a partial rebuild. A complete rebuild starts around $4,000. Prices are before tax.

How much does a chimney liner cost?

A stainless-steel liner costs about $900–$3,800 or more installed, according to HomeStars. Cast-in-place liners run about $2,000–$7,000 or more. The flue size and the appliance decide which type you need.

Do I need a chimney cap?

A cap keeps rain, snow and animals out of the flue, and it's one of the cheapest chimney repairs at about $150–$500. It's worth having on any working chimney.

Can chimney repairs be done in winter?

Emergency fixes such as a cap or temporary flashing can. Masonry and crown work needs temperatures above freezing for the mortar to cure, so it's best done from late spring to early fall.

Does home insurance cover chimney repair?

Square One says insurance generally covers chimney damage from an insured peril, such as a sudden event, but not wear or neglect. Check your own policy and keep maintenance records.

Is it cheaper to remove a chimney than repair it?

Not always. HomeStars puts removal at $2,000–$15,000, with an average near $4,500, while a crown or cap repair costs far less. Removal makes sense when the fireplace is no longer used and a rebuild is due.

Want to know what your job will cost?

Ask for a free, no-obligation quote from a vetted pro. It takes two minutes.

Get a free quote

Related guides

Sources

  1. Chimney Build & Repair Cost Guide Toronto, HomeStars (checked 2026-10-30)
  2. Chimney cleaning: More than just a simple sweep, CAA-Québec (checked 2026-10-29)
  3. When to clean your chimney, and how to do it, Promutuel Assurance (checked 2026-10-29)
  4. Learning about chimney maintenance, Square One Insurance (checked 2026-10-29)
  5. Why do I need a clearance letter?, WorkSafeBC (checked 2026-10-29)
  6. Questions and answers: Clearances, WSIB Ontario (checked 2026-10-29)
  7. GST/HST calculator (and rates), Canada Revenue Agency (checked 2026-10-29)

Written by the BrightKept editors from the sources above. How we write our guides.

Get a free quotePrices